Instrument Pre-Disinfection Solution for Manicure and Pedicure Tools
The instrument pre-disinfection solution DV-51 is designed for reusable manicure and pedicure instruments before the sterilization stage. TEC-NAILS DV-51 supports the pre-disinfection step in a professional nail service workflow. Use the product at the specified dilution and follow the contact time and preparation instructions shown on the product information.
Prepare Instruments Before Sterilization
Reusable manicure and pedicure instruments require appropriate preparation before sterilization. DV-51 is intended for the pre-disinfection stage and must not replace sterilization.
Follow the recommended process carefully to prepare used instruments before proceeding to the next stage. Correct dilution, sufficient contact time, thorough rinsing, and complete drying are important steps in the product instructions.
How to Prepare the Solution
The product information specifies a 0.5% dilution.
- Mix 5 ml of concentrate with 1 litre of water.
- Alternatively, use 20 ml of concentrate per 4 litres of water.
- Place used instruments in the prepared solution.
- Allow a contact time of 15 minutes.
- Rinse the instruments thoroughly.
- Dry them completely.
- Proceed to sterilization.
Always follow the product label and applicable professional hygiene procedures when preparing and using the solution.
Designed for Professional Nail and Foot Care Settings
Manicure and pedicure tools need a consistent preparation process between services. DV-51 fits into the instrument pre-disinfection stage before sterilization, helping salons organize their instrument-handling routine.
The 1L bottle provides a concentrated format that users dilute with water according to the specified ratio. Prepare the working solution as directed rather than using the concentrate undiluted.
Product Details
- Product name: DV-51 Instrument Pre-Disinfection Solution
- Brand: TEC-NAILS
- Size: 1 litre
- Intended use: Pre-disinfection of reusable manicure and pedicure instruments
- Recommended dilution: 0.5%
- Contact time: 15 minutes
- Next step: Rinse, dry completely, and proceed to sterilization
Important Safety and Hygiene Note
DV-51 is a pre-sterilization step, not a replacement for sterilization. Follow the manufacturer’s instructions for preparation, contact time, rinsing, and drying. Also follow applicable local hygiene requirements and the instrument manufacturer’s instructions to ensure the correct processing method for each tool.
Choose the instrument pre-disinfection solution DV-51 from TEC-NAILS as part of your professional instrument preparation workflow before sterilization.
